Common features in the 770/772 model

Essential details of the model to understand its value.

Working width

The working width is 7.45 metres.

The working width is 24' 5,30".

770 or 772?

The chassis is exactly the same; the difference lies in whether or not it has central sun wheel. All chassis are equipped with anchors so that central sun wheels joints can be fitted if necessary. Those that only rake straw do not usually have central sun wheels, while those that make fodder and straw or only fodder usually have the joint, and the central sun wheels can be fitted and removed by simply removing a screw.

Independent swing arms

Each sun wheel has an arm that works independently of the others, allowing them to remain in contact with the ground at all times.

Model 770

For fodder

Connects three windrows from the conditioner up to 3 m long without tying them.
The two central sun wheels will help us move the central windrow to the left side.
For a straight cut, where there are no windrows, the rake will move the entire 7.45m metres it covers.

Model 772

For straw

Connects two harvester windrows up to 6 metres long.
In general, we will not need the central sun wheels. By loosening a single screw, we can remove the central sun wheels.
If necessary, we can also remove the last right sun wheel to give the rake greater output.

Contact us

We are here to assist you with your enquiries.

Email

Telephone

info@rastrillosdoblas.com

+34 655 93 59 81

Address

Pol. Ind. Fondo de Litera c/ Filadores, 10

22520 Fraga (HUESCA) España